Summary of Contents for Ingersoll-Rand 2908P Series
Page 1
Form 04584256 Edition 1 October 2004 Air Impact Wrench 2908P Series Maintenance Information Save These Instructions...
Page 2
Grease Fitting (23). Use Ingersoll-Rand Medium Oil No. 10 for lubricating the motor. Work approximately 6 to 8 cc of Ingersoll-Rand Grease No. 105 into Inject approximately 1 to 2 cc of oil into the air inlet before attaching the impact mechanism.
Page 3
(Dwg. TPD652) torque. 10. Using a sleeve that will contact only the outer ring of the bearing, Coat the Hammers with a light film of Ingersoll-Rand Grease No. press the Front Rotor Bearing (34) into Front End Plate (33) and 105.