Daikin CVXM20A2V1B User Reference Manual page 39

To connect using SSID and KEY number
To reset the connection setting to the factory default
To turn off the wireless LAN connection
CVXM20+FVXM25~50A2V1B
Split system air conditioners
4P625990-1A – 2020.10
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press twice to change the SP menu to .
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green.
4 Open the Daikin Residential Controller application on your smart device and
follow the steps on the screen.
Result: If the connection was successful, the Daikin eye colour alternates between
blue and partly green.
5 Connect your smart device to the same home network as the unit.
6 Press to exit the menu.
Result: The display will return to the home screen.
Reset the connection setting to the factory default in case you want to:
▪ disconnect the wireless LAN and the communication device (e.g. router) or smart
device.
▪ repeat the setting if the connection was unsuccessful.
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press twice to change the SP menu to .
(5 sec.)
3 Hold for at least 2 seconds to confirm the selection.
Result: is blinking. The setting is reset to the factory default.
4 Press to exit the menu.
Result: The display will return to the home screen.
If you want to turn off the wireless connection function:
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press change the SP menu to
for at least 5 seconds while the unit is not
2×
for at least 5 seconds while the unit is not
2×
for at least 5 seconds while the unit is not
.
6 Operation
|
User reference guide
39