6
|
Operation
To connect the wireless LAN to your home network
To connect using the WPS button
User reference guide
38
a Daikin eye
b Partly green
c Red, orange, blue or white
Daikin eye colour alternates between
partly green and...
red
orange
blue
white
4 Press
to exit the menu.
Result: The display will return to the home screen.
The wireless adapter can be connected to your home network using the:
▪
WPS button on the router (if present),
▪
SSID and KEY number located on the unit.
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press
to change the SP menu to .
(5 sec.)
3 Press
to confirm the selection.
Result:
is blinking. The Daikin eye colour alternates between orange and partly
green.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: If the connection was successful, the Daikin eye colour alternates between
blue and partly green.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY
number" [
5 Press
to exit the menu.
Result: The display will return to the home screen.
...then wireless adapter is...
not connected
running and ready to connect to the
home network via WPS button; see
connect using the WPS
▪
connected to the home network via
SSID + KEY.
or
▪
connected to the home network via
WPS button on the router.
off
for at least 5 seconds while the unit is not
1×
4
39].
"To
4
button" [
38].
"To connect using
CVXM20+FVXM25~50A2V1B
Split system air conditioners
4P625990-1A – 2020.10