Push Handles; Central Single-Hand Push Handle Hand Push Handle - PRO ACTIV LITTY 4you Operating Instructions Service Booklet

Operating instructions LITTY 4you Operating instructions LITTY 4you
Please note that the knee lever wheel lock Please note that the knee lever wheel lock
which your product is fitted with is a parking which your product is fitted with is a parking
brake which may only be applied when the brake which may only be applied when the
product is at a standstill. This is not
brake which is suitable for reducing speed. brake which is suitable for reducing speed.

21 Push handles

21.1 Central single-hand push handle
The height of the central single hand push The height of the central single hand push
handle can be adjusted without requiring any handle can be adjusted without requiring any
tools. For the adjustment, the quick release
lever is opened and after successful adjus lever is opened and after successful adjust-
ment, is closed again. The height can be inf ment, is closed again. The height can be infi-
nitely adjusted.
Quick release lever Quick release lever
Figure 39: Closed quick release lever : Closed quick release lever
Figure 40: Open quick release lever, push handle : Open quick release lever, push handle
removed
To remove the push handle, the M4 end stop the push handle, the M4 end stop
screw (AF 3 mm) needs to be unscrewed and screw (AF 3 mm) needs to be unscrewed and
the quick release lever needs to be opened. the quick release lever needs to be opened.
not a service
hand push handle
, the quick release
M4 End stop screw M4 End stop screw
Figure 41: End stop screw attached to bottom of : End stop screw attached to bottom of
central single hand push handle central single hand push handle
After every adjustment or after reattach- After every adjustment or after reattac
ment following removal, check that the push ment following removal, check that the push
handle is firmly attached in its position. If ne handle is firmly attached in its position. If nec-
essary the tension can be adjusted by turning essary the tension can be adjusted by turning
the quick release lever clockwise until it the quick release lever clockwise until it
reaches the end stop. In addition reaches the end stop. In addition to that, the
M4 end stop screw (AF 3 mm) needs to have M4 end stop screw (AF 3 mm) needs to have
been mounted again.
The central single hand push handle is also The central single hand push handle is also
available with a folding handle end (o with a folding handle end (op-
tional). In this case, the angle of the handle . In this case, the angle of the handle
end can be adjusted in 10 steps using the push end can be adjusted in 10 steps using the push
button or can be completely folded down. button or can be completely folded down.
Push button Push button
Figure 42: Push button for adjusting the angle and : Push button for adjusting the angle and
folding away
20