Table of Contents
Advertisement
Operating instructions LITTY 4you
Operating instructions LITTY 4you
The waist belt which may be fitted is not
The waist belt which may be fitted is not
designed as a safety belt in a motor vehi
designed as a safety belt in a motor vehicle
and may not be used for this purpose.
and may not be used for this purpose.
To reduce the weight, individual comp
To reduce the weight, individual compo-
nents, such as the caster wheel forks with
nents, such as the caster wheel forks with
caster wheels and the drive wheels can be
caster wheels and the drive wheels can be
removed for loading and stored separately.
removed for loading and stored separately.
Furthermore, if the product has been fitted wi
Furthermore, if the product has been fitted with
push handles and anti-tippers, these can also
tippers, these can also
be removed. The product and all associated
be removed. The product and all associated
components must be secured during transport
components must be secured during transport
so that they are not damaged (e.g. by falling
so that they are not damaged (e.g. by falling
over) and do not become a hazard to persons
over) and do not become a hazard to persons
or other products.
If the wheelchair user needs to be tran
eelchair user needs to be trans-
ported over an obstacle, such as a step, and if
ported over an obstacle, such as a step, and if
there are suitable facilities such as a ramp or a
there are suitable facilities such as a ramp or a
lift available, then these should be used. If
lift available, then these should be used. If
such facilities are not available, then the o
such facilities are not available, then the ob-
stacle is to be overcome by being c
stacle is to be overcome by being carried by
two helpers. When carrying the wheelchair, it
two helpers. When carrying the wheelchair, it
may not be lifted by the side sections, the drive
be lifted by the side sections, the drive
wheels, the pushing handles or the footrests.
wheels, the pushing handles or the footrests.
We recommend holding the product by the
We recommend holding the product by the
lower frame tubes of the main frame and hol
lower frame tubes of the main frame and hold-
ing the back cross bar.
24 Malfunctions
In the event of any malfunctions which cannot
In the event of any malfunctions which cannot
be solved by yourself based on the operating
be solved by yourself based on the operating
instructions included in the scope of delivery,
instructions included in the scope of delivery,
please contact your specialist retailer or PRO
please contact your specialist retailer or PRO
ACTIV directly.
Malfunctions must be solved before
Malfunctions must be solved before any
further use or, if they occur during the journey,
further use or, if they occur during the journey,
this must be interrupted immediately.
this must be interrupted immediately.
25 Cleaning and care
Clean and grease the quick-
on the drive and caster wheels as well as all
on the drive and caster wheels as well as all
the ball bearings at regular intervals to ensure
the ball bearings at regular intervals to ensure
everything works reliably.
Regular cleaning of the product is prescribed
Regular cleaning of the product is prescribed
to prevent the components becoming clogged
to prevent the components becoming clogged
up due to dirt. In particular, the product should
be carefully cleaned after every major use, e.g.
be carefully cleaned after every major use, e.g.
summer or winter holidays.
summer or winter holidays.
or neutral cleaning agents. Do not use any
or neutral cleaning agents. Do not use any
abrasive cleaning agents or aggressive, acidic
abrasive cleaning agents or aggressive, acidic
cleaners, to prevent scratching or fading of the
cleaners, to prevent scratching or fading of the
coating or the anodised parts.
coating or the anodised parts.
steam or high pressure.
To avoid corrosion and therefore malfunctions
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
or breakages of components, the product may
not be exposed to any aggressive environ-
not be exposed to any aggressive enviro
mental influences. If this cannot be avoided,
mental influences. If this cannot be avoided,
the wheelchair should be cleaned immediately
the wheelchair should be cleaned immediately
after such use and moving parts need to be
greased. Regular cleaning prevents corrosion
and increased wear.
please contact PRO ACTIV.
please contact PRO ACTIV.
26 Maintenance
26.1 General instructions
The product is not a maintenance-free device.
The product is not a maintenance
Therefore, please observe the following i
structions about maintenance.
structions about maintenance.
defects in your product, in the interests of your
defects in your product, in the interests of your
own safety, you should contact your specialist
own safety, you should contact your specialist
retailer or PRO ACTIV before using it again
retailer or PRO ACTIV before using it again
and have the defect remedied. Screws and
other elements need to be secured properly
other elements need to be secured properly
again after repairs.
one or more points with less than 1 mm of
one or more points with less than 1 mm of
-release axles
tread on the tyres, the tyres must be changed
tread on the tyres, the tyres must be changed
as otherwise there is an increased risk of an
as otherwise there is an in
accident.
due to dirt. In particular, the product should
Clean your wheelchair with water, solvent
Clean your wheelchair with water, solvent
The product must not be cleaned using
The product must not be cleaned using
and moving parts need to be
Regular cleaning prevents corrosion
If you need care products for your product,
If you need care products for your product,
General instructions
e, please observe the following in-
If repairs are required or there are any
If repairs are required or there are any
the defect remedied. Screws and
For tyres with tread: As soon as there is
For tyres with tread: As soon as there is
22
Advertisement
Table of Contents
