Advertisement
Available languages
Available languages
• Dismantle both blades 32 as described above�
• Loosen winged nuts 38 and place both blades 32 into
blade sharpening device 16 (see fig. 14.1). The back
parts of blades 32 must rest on stops of template 35�
• Tighten winged nuts 38� Heads of clamping bolts 34
and plate 36 shall securely fix both blades 32 pressing
them against template 35 to prevent their movement�
Cutting edges of blades 32 shall be located in same
plane (see fig. 14.1).
• Sharpen both blades 32 at the wet hard-grained
grinding stone�
• Finish both blades 32 at the wet fine-grained finish-
ing grinding stone� It is also recommended to polish
cutting edge surfaces of blades 32 as this will ensure
best operational results�
• Install both blades 32 as described above�
Replacement of driving belt (see fig. 16)
• Unscrew housing screws 40 of protective casing 7
and remove it (see fig. 16).
• Remove the worn driving belt 39�
• Clean the belt pulleys with a brush�
• Place a new driving belt 39 onto the driving pulley
(smaller diameter) and than pull in on the driven pulley
(larger diameter) rotating drum�
• Place protective casing 7 back and tighten
screws 40�
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
The manufacturer reserves the possibility to introduce changes.
flush the power tool with compressed air thought the
ventilation slots 10�
After-sales service and application service
Our after-sales service responds to your questions
concerning
maintenance
product as well as spare parts� Information about
service centers, parts diagrams and information
about spare parts can also be found under:
www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use
any kind of technology that works on the principle of
clamping packaging�
Environmental protection
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging should
be sorted for environment-friendly recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper
manufactured without chlorine�
English
25
and
repair
of
your
Advertisement
