Two-Way Intercom - Sena Expand Boom User Manual

Expand Boom

6.2 Two-way Intercom

6.2.1 Start and End Two-way Intercom
1. You can start a one-on-one intercom conversation with any
intercom friend by tapping the Center Button: Single tapping
to intercom with the first intercom friend, double tapping for the
second intercom friend, or triple tapping for the third intercom
friend.
2. To terminate a one-on-one intercom conversation, single tap the
Center Button. This will end the intercom conversation.
st
1 intercom
friend
Start intercom Tap once
End intercom
Start & End Two-way Intercom
16
nd rd
2 intercom 3 intercom
friend friend
Tap twice Tap three times
Tap once
6.2.2 Intercom and Mobile Phone Call
1. When you have an incoming mobile phone call during an
intercom conversation, you will hear a ring tone. You can choose
whether to 1) answer the mobile phone call and stop the intercom
conversation, or 2) reject the phone call and stay on the intercom
conversation or 3) ignore the incoming phone call and allow the
caller to go to voice mail.
a. To answer the phone call and stop the intercom conversation,
tap the Center Button. When you hang up the phone call, the
intercom will automatically be recovered.
b. To reject the phone call and stay on the intercom conversation,
press and hold the Center Button for 2 seconds until you hear
a beep.
c. To ignore an incoming phone call, just wait until the caller goes
to voice mail. You will maintain the intercom call while the caller
is leaving a voice message.
Unlike other motorcycle Bluetooth headsets, this prevents a
user from being dropped out of an intercom conversation by an
incoming mobile call.