Electromagnetic Compatibility (Emc) - Leica LS10 User Manual

1.6
Description
12
WARNING
Improper disposal
If the product is improperly disposed of, the following can happen:
If polymer parts are burnt, poisonous gases are produced which may
•
impair health.
If batteries are damaged or are heated strongly, they can explode and
•
cause poisoning, burning, corrosion or environmental contamination.
By disposing of the product irresponsibly you may enable unauthorised
•
persons to use it in contravention of the regulations, exposing themselves
and third parties to the risk of severe injury and rendering the environ-
ment liable to contamination.
Improper disposal of silicone oil may cause environmental contamination.
•
Precautions:
▶
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with
the national regulations in force in your country.
Always prevent access to the product by unauthorised
personnel.
Product-specific treatment and waste management information can be
received from your Leica Geosystems distributor.
WARNING
Improperly repaired equipment
Risk of injuries to users and equipment destruction due to lack of repair
knowledge.
Precautions:
▶ Only authorised Leica Geosystems Service Centres are entitled to repair
these products.

Electromagnetic Compatibility (EMC)

The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radi-
ation and electrostatic discharges are present, and without causing electro-
magnetic disturbances to other equipment.
WARNING
Electromagnetic radiation
Electromagnetic radiation can cause disturbances in other equipment.
Precautions:
▶ Although the product meets the strict regulations and standards which
are in force in this respect, Leica Geosystems cannot completely
exclude the possibility that other equipment may be disturbed.
Safety Directions