Usb Connection; Saving Data On The Usb Stick (Data Backup); Read Data (Data Load); Part 3. Maintenance - involight Commander ScanControl Manual

The Midi functions are assigned as follows:
Bank
Bank 1
Bank 2
...
Bank 15
Chase
Chase
Chase
Chase
Chase
Chase
Chase
Chase

2.7 USB connection:

Data can be saved and read via the USB socket (USB stick). The entire memory content (scenes, chases) of the
internal memory is saved as a file.

2.7.1 Saving data on the USB stick (Data backup):

The USB stick must be connected to the USB socket.
1. Turn off the device.
2. Simultaneously hold down the / PAGE SELECT / and one of / FIXTURES 1-8 / and switch on the device. The
display shows, for example: / USBSAVE1 /. Wait for the process to finish.
You can create up to 8 backups.

2.7.2 Read data (data load):

1. Turn off the device.
2. Simultaneously hold down the / USB DISK / and one of / FIXTURES 1-8 / and switch on the device. The display
shows, for example: / USBLOAD1 /. Wait for the process to finish.

Part 3. Maintenance:

The device should be cleaned regularly from impurities such as dust etc. Use for
Clean a lint-free, damp cloth. Never use alcohol or solvents for cleaning!
There are no serviceable parts inside. Maintenance and service work are exclusive
reserved for authorized dealers!
Note number
00
01
02
03
04
05
06
07
08
09
10
... usw.
...
119
Note number
120
121
122
123
124
125
126
28
Function
Scene 1 on / off
Scene 2 on / off
Scene 3 on / off
Scene 4 on / off
Scene 5 on / off
Scene 6 on / off
Scene 7 on / off
Scene 8 on / off
Scene 1 on / off
Scene 2 on / off
Scene 3 on / off
... etc.
...
Scene 8 on / off
Function
Chase 1 on / off
Chase 2 on / off
Chase 3 on / off
Chase 4 on / off
Chase 5 on / off
Chase 6 on / off
Blackout on / off