Safety During Normal Operation; Hazards Caused By Electric Power - ECD Brake Board Operation Manual

1.2.4 Safety during normal operation.

 Only operate the machine when all protective equipment is fully
operational.
 Prior to switching on the machine, ensure that the startup can cause no
harm to personnel.
 Regularly maintain and check machine for externally identifiable damage
and check that all the safety devices are operational.

1.2.5 Hazards caused by electric power.

 Work on the electric power supply may only be carried out by a qualified
electrician.
 Check the electrical equipment of the machine at regular intervals.
Repair loose connections and scorched cables immediately.
 Keep the control cabinet locked at all times. Access is only permitted to
authorized personnel with a key or tool.
 If work has to be carried out on live parts, do this only in the presence of a
second person who can switch off the master switch in an emergency.
 The machine causes electromagnetic interference sources. For this reason,
do not use any sensitive equipment in its vicinity.
5