PSC 2000781J MkII MLB Operating Procedure page 11

Qty
1 Dial torque wrench cable of indicating 1 in∙lb
7/64 inch ball hex key to fit on torque wrench (regular hex
1
end and universal joint may be substituted for ball driver)
Qty
Caliper to measure Lightband flange separation (1.3 to 2.1
1
inch range)
Optional: Telescoping gage to measure Lightband flange
1
separation (1.3 to 2.1 inch range)
AR
(2 per
4000637 Lightband Compression Tool
Spring
typ.)
1 per
Nylon cable tie, minimum 50 lb breaking strength, 7 inch
LCT
long
pair
1 Cable tie tool with adjustable force
1 1/4 inch open end wrench
1 Dial torque wrench (not break-over), 12 in∙lb capability
1 3/32 inch hex key attachment for torque wrench
1 Wire cutter (to cut cable tie)
Optional: break-over torque wrench with 3/32 inch hex key,
1
12 in∙lb capability (useful if access to LCTs is limited)
PSC Proprietary
Table 3-5: Preparing to compress (section 12)
Item
Table 3-6: Using LCTs (section 18)
Item
2000781J MkII MLB Operating Procedure
Make & Model Typically Used by PSC
Seekonk SL-6
-
Make & Model Typically Used by PSC
Mitutoyo 500-175-30
Starrett 229C
-
MS3367-1-0 (The '0' specifies the color.
Any final number is acceptable.)
Ty-Rap ERG 50
-
Precision Instruments DS1F15CHNM
-
-
Page 11 of 50