Advertisement
Oxford
®
Stretcher Adjustment Cradle
3. Assembly & Commissioning Instructions
The following components are included with your Stretcher Adjustment Cradle (See Fig. 5).
1 x Stretcher Adjustment Cradle (2 pieces)
4 x Bolts & Fixings (not shown)
Stretcher Adjustment
Initial Assembly
1. Place the attachment cradle on to a flat surface (See Fig. 6).
2. Align the stretcher adjustment with the attachment cradle. Orientate the stretcher adjustment
so that it is parallel to the adjustment cradle hooks (See Fig. 7).
NOTE: Holes will not line up if the cradle is incorrectly aligned.
6
Correct Alignment
Attachment Cradle
Incorrect Alignment
English
Fig. 5
Fig. 6
Fig. 7
Advertisement
