Summary of Contents for Joerns Oxford Standing Harness
Page 1
User Instruction Manual Oxford Standing Harness ® To avoid injury, read user manual prior to use. For alternative languages, contact your authorised service provider.
On occasions, material, dimensional and other changes outside of the standard specification are requested. Please be advised, that aside of any model specific references, fitting, washing and safety guidelines remain applicable. If you are in any doubt, please contact your authorised Oxford service agent or Joerns Healthcare directly.
Page 3
Oxford ® English Standing Harness Fitting the Sling from a Seated Position Feed the Standing Harness down the back of the Attach the leg supports to the Standing Harness patient and position around the chest. by offering the safety clasp to the retaining ring at the bottom of the Standing Harness as shown.
Page 4
Oxford ® English Standing Harness Fitting the Sling from a Standing Position Position the patient’s legs into the leg supports. Raise and position the Standing Harness up You can adjust the length of the leg supports for towards the chest. The Standing Harness is comfort as appropriate.
PLEASE NOTE: Additional slings are available to meet individual patient needs. We advise that you always seek the advice of a trained clinician, authorised Oxford distributor or Joerns Healthcare prior to purchase or use. End of Life Disposal Slings and associated material accessories should be sorted as combustible waste in accordance with local or national regulations.