Advertisement
Oxford
®
English
Stretcher Adjustment Cradle
1. Oxford Stretcher Adjustment Cradle
As an aftermarket accessory, you can retro-fit your Oxford Stature/Presence lift with an Oxford
Stretcher Adjustment Cradle (See Fig.1). This is installed in place of the 6-point Spreader Bar or
4-point Cradle.
Fig. 1
Safe Working Load when fitted with the Oxford Canvas Stretcher (Item Number SL30010) is
227Kg (500lbs).
Intended Use:
JOERNS HEALTHCARE RECOMMENDS THE USE OF GENUINE OXFORD PARTS. The Oxford
Presence and Canvas Stretcher are designed to be compatible with one another. For country
specific guidance on their use and compatibility, please refer to the product label(s) or contact your
local market distributor or Joerns Healthcare.
Joerns Healthcare Ltd cannot state that all hoists and stretcher products are compatible. However,
should a competent person carry out an appropriate risk assessment prior to prescription, and
is confident that the hoist and stretcher can be used together safely, then that decision and
responsibility is quite rightly with the prescriber. If in doubt, seek advice.
The Stretcher Adjustment Cradle is intended for levelling a patient on the chosen stretcher prior to
lifting to ensure the patient maintains a horizontal position for safety and comfort.
The Stretcher Adjustment Cradle is for use by a minimum of two trained operators.
The Stretcher Adjustment Cradle is connected simply to the chosen Oxford lift by the use of a quick
release pin.
Advantages of the Oxford Stretcher Adjustment Cradle include:
• Adjustment can be made by operating either the left or right hand levelling handles
• The balance can be adjusted using one hand.
Serious Incident Reporting:
In the event of a serious incident taking place during use of this product, affecting the patient and/
or care-giver, it must be reported to the product manufacturer or authorised distributor. Should the
incident take place within the European Union (EU), it must also be reported to the local competent
authority within the member state.
Operation/Storage Conditions:
Operating temperature ................................. 5ºC to 40ºC
Storage temperature..................................... 5ºC to 40ºC
Relative humidity .......................................... 10% to 95%
3
Advertisement
