Figure 19.Throttle Quadrant - Eclipse 500 System Manual

Hide thumbs Also See for 500:
Table of Contents

Advertisement

Section 2. Avio Avionics Suite
Eclipse 5OO Systems Manual
h. Throttle Quadrant Switches (Flaps & Rudder Trim)
The throttle quadrant contains the two throttles, a flap position selector and a
rudder trim switch. In addition there are two switches located on the left
throttle, an Autothrottle Disconnect (A/T DISC) and Takeoff/Go-around
(TOGA) switches.
The throttles have no direct connection to the ACS; information sensed by
two position sensors for each throttle is sent directly to the FADEC Units.
Rudder trim, flap selector, autothrottle disconnect and TOGA switch position
information is sent through the center switch panel to the PFDs then on to
the ACS.
Figure 19. Throttle Quadrant
i.
Line Select Keys
Line select keys on the PFD and MFD allow control of various aircraft inputs,
including frequency entry and system control. Each display has 10 line
select keys that correspond to different functions depending on what PFD or
MFD function is enabled. Line select keys are often associated with the PFD
or MFD pages within which they are used to activate or deactivate specific
systems components (Ex. Fuel Pumps).
Copyright © — Eclipse Aviation Corporation
Version 2.0 April 2007
27

Advertisement

Table of Contents
loading

Table of Contents