Table 28.Flow Control Valve Manual Shutoff Operation - Eclipse 500 System Manual

Section 9. Climate Control
AIR SOURCE Switch Position
* Using AIR SOURCE switch.
When the AIR SOURCE switch is set to an "on" position (NORM, L, or R), the flow
control valves will not open if any of the following conditions exist:
Bleed air temperature is too high
Engine is starting
When the AIR SOURCE selector is placed in the OFF, L or R position, a L (R) AIR
SOURCE SELECTOR status message appears, indicating that one or both of the
bleed air sources is off.
If a flow control valve fails, a L (R) BLEED VALVE FAIL advisory message appears.
196
Table 28. Flow Control Valve Manual Shutoff Operation *
Both flow control valves are in automatic control
NORM
mode.
Left flow control valves is in automatic control mode.
L
Right flow control valve closed.
Left flow control valve closed.
Right flow control valve is in automatic control
R
mode.
Both flow control valves closed.
OFF
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
Flow Control Valve Position
Version 2.0 April 2007