Dimplex Vivente Operating Instructions Manual page 11

Product Features Overview
Function
Standby
Temperature Adjustment (15
- 32C)
Heat Disable
Heater Mode (ECO, Boost,
Frost Protection, Fan)
Flame Intensity
Volume Setting
Run-back Timer
7 - Day Timer
Volume Setting
Ambient Light Setting
Ambient Light On/Off
Customizable Ambient
SmartSense
Smart Phone App
"Flame Connect" allows you to control your fire's function over Bluetooth, from your hand.
Search for "Flame Connect" on your App Store and install to get started.
Fault Codes
On Board Display
CD20
CD03
CD04
CD05
CD53
On Board Controls
✓
✓
✓
-
✓
✓
✓
-
✓
✓
-
-
✓
Description
Room Sensor (NTC) Error
The internal NTC is measuring elevated tempera-
tures within the product.
Internal Communication Error
The internal temperature sensor has failed.
This error displays when timer settings are out of
sync. This occurs when the product has power cut
off for over 40hours. The product can no longer
operate at the determined time settings, and CD53
is displayed.
Remote Control
✓
✓
-
-
✓
✓
✓
-
✓
✓
✓
-
✓
Action
Contact your retailer and reference this error
code.
Unplug Unit at power supply to reset, allow it
to cool down, then plug unit back in to restart.
Contact your retailer and reference this error
code.
Unplug Unit at power supply to reset, allow it
to cool down, then plug unit back in to restart.
Reset the timer settings using the Flame Con-
nect APP.
11
App Control
✓
✓
-
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓