General Options - MediaFORM Director Series Operator's Manual

General Options

DIRECTOR systems equipped with Pioneer DVD-R drives do not
Note:
support MediaFORM SmartDRIVE features.
Vertically along the left side of the Job tab is a series of nine check boxes:
Copy, Verify, Print, Print First, Simulate, Archive, Align, Protect,
SmartGuard Media. The first step in creating a job is to set the general
options so as to define which operations the DIRECTOR will perform when
the job is submitted for production.
• Check or uncheck the option boxes to enable or disable the production
options needed for your job:
General Options:
Copy
Verify
Print
Print First
Simulate
Archive
Align
Protect
DIRECTOR Series Operator's Guide
When checked, the CDs in the submitted job will be
recorded using the disc image file selected in the
IMAGE field.
When checked, the CDs in the submitted job will
automatically be compared against the source files
after recording is completed.
When checked, the CDs in the submitted job after
recording will be printed with the disc label selected
in the LABEL FILE field.
When checked, the CDs in the submitted job before
recording will be printed with the disc label selected
in the LABEL FILE field.
When checked, the CDs in the submitted job will
not be recorded.
When checked, an existing CD is saved to the hard
drive as a physical image file for later recording.
This option is used for duplicating existing CDs.
When checked, CDs will be placed on the optical
aligner so that the disc may be oriented relative to
the alignment mark. This is used for over-printing
silk-screened discs.
When checked, the CDs in the submitted job will be
recorded so that they are copy protected using the
Page 72
Document Revision: 0802