System Drives - MediaFORM Director Series Operator's Manual

DIRECTOR Series Operator's Guide
Document Revision: 0802

System Drives

The SYSTEM DRIVES window allows you to specify which hard disk
drives the DIRECTOR uses exclusively. The factory settings should be
sufficient for most uses.
2000-8: Be sure that: D:, E:, F:, G:, H:, I:, J:, K:, and L: are selected. DO
NOT SELECT C:.
2000-4: Be sure that: D:, E:, F:, and G: are selected. DO NOT SELECT
C:.
2000-2: Be sure that: D:, and E: are selected. DO NOT SELECT C:.
example of 2000-4
To change the SYSTEM DRIVES:
• Select or de-select the check box next to the appropriate drive.
• Click "Apply" after making the changes.
Page 43