Duplicator Id (Optional); Default Job File Folder (Required); Default Image File Folder (Required) - MediaFORM Director Series Operator's Manual

DIRECTOR Series Operator's Guide
• Click the ASYNCHRONOUS MODE pull down and select the desired
"disabled" or "level O" setting (level 1 and level 2 not used).

Duplicator ID (Optional)

The DUPLICATOR ID field is a user defined six-digit code that is written
into the Watermark of all discs created or copied with the DIRECTOR.
• Click the DUPLICATOR ID field and enter a string of six digits. Leave
the field blank if no string is to be recorded.

Default Job File Folder (Required)

The DEFAULT JOB FILE FOLDER field is used to specify the default
location where job files (*.JOB) will be saved. The factory setting
(C:\DIRECTOR\Jobs\) should be sufficient for most uses. To change the
default setting:
• Click the Browse button below the DEFAULT JOB FILE FOLDER
field.
• Select the volume and directory where you wish to save job files.
• Click the OK button.

Default Image File Folder (Required)

The DEFAULT IMAGE FILE FOLDER field is used to specify the default
location where disc image script (*.ISC) will be saved. The factory setting
(C:\DIRECTOR\Images\) should be sufficient for most uses. To change the
default setting:
• Click the Browse button below the DEFAULT IMAGE FILE FOLDER
field.
• Select the volume and directory where you wish to save disc image files.
• Click the OK button.
Page 36
Document Revision: 0802