Location O Fcd-R/Rw Recorder Parts And Controls; Mediaform Smartdrive 24X - MediaFORM Director Series Operator's Manual

Location Of CD-R/RW Recorder Parts And Controls

MediaFORM SmartDRIVE 24x

Legend
Disc tray - Discs are loaded and removed from this tray. Pressing the eject button will open the
1)
tray when the power to the DIRECTOR is switched on.
Read and write status LEDs - These indicators light up when the recorder is reading or writing.
2)
Eject button - This button is used to manually open or close the disc tray.
3)
Emergency eject pinhole - In the event that the disc tray will not open by pressing the eject button
4)
insert the tip of a large paper clip into this hole and push.
DIRECTOR Series Operator's Guide
Page 14
Document Revision: 0802