Installing The Monitor, Keyboard And Mouse; What's In The Box; Connecting The Monitor; Connecting The Mouse And Keyboard - MediaFORM Director Series Operator's Manual

Installing The Monitor, Keyboard And Mouse

Before operating the DIRECTOR, the monitor, keyboard and mouse must
be attached.

What's In The Box

The DIRECTOR includes:
• 17" SVGA monitor
• Power cord
• Keyboard
• Mouse
• Monitor stand
• MediaFORM mouse pad

Connecting The Monitor

• Place the monitor on either side of the DIRECTOR unit.
• Make sure the monitor power switch is set to the off position.
• Connect one end of the power cord to the VAC Out on the monitor and
the other to the wall power outlet.
• Connect the High Density DB15 male connector of the video cable to
the High Density DB15 female Video In port on the back of the host
computer.

Connecting The Mouse And Keyboard

• Connect the PS/2 male connector of the mouse cord to the PS/2 female
Mouse In port on the back of the DIRECTOR.
• Connect the PS/2 male connector of the keyboard cord to the PS/2
female Keyboard In port on the back of the DIRECTOR.
DIRECTOR Series Operator's Guide
Page 21
Document Revision: 0802