Director Application Layout; Director Application Configuration - MediaFORM Director Series Operator's Manual

DIRECTOR Application Layout

The DIRECTOR application is organized into a sequence of eight pages
accessible by tabs at the top of the screen (Status, Job, Image, WaveMan,
Label Designer, Resources, Setup, Log). By completing information on
these cards you control the actions of the DIRECTOR to create, duplicate
and verify CDs as well as print disc labels.
Tabs:
Status
Job
Image
WaveMan
Label Designer
Resources
Setup
Log

DIRECTOR Application Configuration

Before creating or duplicating a CD the DIRECTOR application must first
be configured. The Setup tab is used to establish a number of important
settings including basic operation parameters as well as the authorized users
and privileges they have using the DIRECTOR.
Apply button must be clicked in order for any changes to take effect. Except
Note:
for modification of users and privileges.
To begin or modify an existing setup of the DIRECTOR:
• Click the Setup tab. The screen will now display:
DIRECTOR Series Operator's Guide
Displays the status of jobs after they have been
submitted for production.
Brings together the data or audio contents and label
components of a CD so it can be produced.
Specifies the contents of a data CD to be recorded.
Specifies the contents of an audio CD to be recorded.
Creates labels to be printed on the surface of CDs.
Displays the hardware elements connected to the
DIRECTOR.
Defines operating settings and user privileges.
Displays the database of information maintained on all
jobs.
Page 32
Document Revision: 0802