The Setup tab is divided into a number of information fields that must
be completed.
Printer Driver (Required)
The Printer Driver pull-down is used to indicate to the DIRECTOR the
type of printer that is installed.
• Click the Printer Driver pull down and select "MediaFORM
Spectrum2".
Operator's Email Address (Optional)
The OPERATOR'S EMAIL ADDRESS field is a user defined email
address to which a network attached DIRECTOR will send a message when
the unit requires attention (such as an empty input spindle, etc.). The email
feature requires the presence of a POP3 or IMAP server on the network and
that an email client account be created for use by the DIRECTOR.
DIRECTOR sends email via MAPI hence you must first setup a MAPI
Note:
email client on the DIRECTOR. Make sure you set this client to be used
from MAPI based applications.
• Click the Operator's E-mail Address field and enter an email address.
Leave the field blank if the DIRECTOR is not attached to a network or
if
you
DIRECTOR Series Operator's Guide
do
not
want
to
Page 33
receive
unit
attention
Document Revision: 0802
messages.