Mitsubishi Electric MELSEC iQ-F Series Programming Manual page 101

FX3 compatible transition operation mode setting
This setting is designed to operate the SFC program in the same manner as on FX3. Use this setting to maintain the
compatibility with FX3 when the configuration of FX3 used on the user's equipment is replaced with the configuration of FX5.
[CPU Parameter]  [SFC Setting]  [FX3 Compatible Transition Operation Mode Setting]
Window
Displayed items
Setting
Disable (default)
Enable
For the continuous transition, refer to Page 107 Continuous transition ON/OFF operation.
For the replacement of the SFC program from FX3 to FX5, refer to the following.
Transition from MELSEC FX3G, FX3U, FX3UC Series to MELSEC iQ-F Series Handbook
Description
Operation of FX5. "Continuous transition" or "No continuous transition" can be specified.
Operation of FX3. The program operates with continuous transition (operation compatible with FX3).
8 SFC PROGRAM
99
8.4 SFC Setting
8