Controls And Indicators - Audio Pro DVD ONE User Manual

COnTROls AnD inDiCATORs

MAin UniT
Rear panel
1
24
23
1) hDMi output
For best picture connect an HDMI cable (extra ac-
cessory). This is provided your TV has HDMI input.
2) hDMi inputs 1 & 2
Connect external video sources such as Blue Ray
player, Video games, HD TV satellite box etc.
3) Component output
Connect a component video cable to your TV (ex-
tra accessory) Note: This is one of several options
to connect to your TV.
4) s-ViDEO output
Connect an S-VIDEO cable to your TV (extra ac-
cessory). Note: This is one of several options to
connect to your TV.
5) Composite output
Connect the enclosed composite cable to your TV.
Note: This is one of several options to connect to
your TV.
6) AUX 1 Coax digital audio input
Connect a coax digital audio cable from an ex-
tarnal audio/video source. A video signal can be
connected to AUX  and the audio signal selected
as Coax Digital in.
7) AUX 1 Composite video input
Connect a composite video cable from an external
video source. Select AUX  as source.
8) AUX 1 s-ViDEO input
Connect an S-VIDEO cable from an external video
source. Select AUX  as source.
9) AUX 2 s-ViDEO input.
Connect an S-VIDEO cable from an external video
source. Select AUX  as source.
3
2 4 5 6 7 8
19
22 21 20
9 10
14
18 17 16 15
10) AUX 2 Composite video input
Connect a composite video cable from an external
video source. Select AUX  as source.
11) Main power switch
Set to OFF if the unit will not be used for a longer pe-
riod of time. In ON position (power indicator is blue or
red) the unit can be switched between standby mode
and power on with the power switch on the front pa-
nel or from the remote control. In standby mode the
power indicator is red. If main power switch is set to
OFF the indicator is off.
12) Power inlet
Connect the enclosed power cable to mains. Do not
connect to this unit until all other connections are
made.
13) left speaker terminal
Connect to your left speaker. Make sure to check the
polarity (+ to +) and (- to-).
14) Right speaker terminal
Connect to your right speaker. Make sure to check
the polarity (+ to +) and (- to-).
15) AUX 3 audio input
Connect an RCA cable from an external audio source.
Note: AUX  input is dedicated for audio only.
16) AUX 2 audio input
Connect an RCA cable from an external audio source.
Note: AUX  input is an audio/video input. Connect
the video signal to either AUX  S-VIDEO input or to
AUX  Composite input.
17) AUX 1 audio input
Connect an RCA cable from an external audio source.
Note: AUX  input is an audio/video input. Connect
the video signal to either AUX  S-VIDEO input or to
AUX  Composite input. Digital audio can also be
connected to AUX  Optical or Coax input.
11
13 12
7