Controls And Indicators; The Front Panel - Audio Pro Stereo Zero Operating Instructions Manual

Table of Contents

Advertisement

CONTROLS AND INDICATORS

FRONT PANEL
1 2
8
1) Power switch
Press this button to turn on the receiver, assuming that
it is in standby mode (the indicator LED on the front
panel is red). If it is not red, the receiver is off. Turn on
the receiver with the Main ON/OFF switch on the rear
panel. Press the button again to put the receiver in
standby mode.
2) Stop
Press the button to stop playback of CD or USB me-
mory.
3) Play/Pause
Press this button to start playback of a CD or USB
memory. Make sure there is a CD in the tray (5). Press
the Play button again to pause the CD/USB. By press-
ing the Play button again, the CD/USB will begin play-
ing from the point at which it was paused.
4) Eject
Press this button to open or close the CD tray.
5) CD tray
Place a CD in the tray with the label face up. Open the
tray by pressing the EJECT button (4). Press it again to
close the CD tray.
6) Source (selection of audio source)
Press to select the audio source (CD/FM/SIDE/USB/
AUX1/ AUX2 or AUX3). The source will be indicated
briefly in the display (11).
7) Volume
Use this knob to adjust the volume. It is ca. two full
turns from minimum to maximum volume. As the knob
is turned, the volume level is shown on the display.
VOL OO indicates minimum volume (quiet) and VOL 50
indicates maximum volume.
6
4
3
9
10
5
11
8) Operating mode indicator
Indicates whether the unit is turned on (blue) or in
standby mode (red). If it is not illuminated, the recei-
ver has been turned off with the ON/OFF switch on
the rear panel.
9 & 10) Skip/Search/Tune
CD/USB mode: press (9) to select beginning of the
track on the CD/USB that is being played. Keep
pressed to search backwards in the current track
being played. Press PLAY to resume playback.
Press (10) to select next track on the CD/USB that is
being played. Keep pressed to search forward in the
current track being played. Press PLAY to resume
playback.
Tuner mode: press (9) to automatically search the
next radio station down the dial. Press (10) to automa-
tically search the next radio station up the dial.
11) Display window
Operation indicators are displayed here.
6
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents