Tuner Functions; Manual/Automatic Search - Audio Pro DVD ONE User Manual

TUnER FUnCTiOns

Manual/Automatic search of FM/AM radio stations
Select TUNER as source using the SOURCE button.
Select FM-stereo, FM-mono or AM with the AM/FM
button on the remote control.
On the front panel, press TUNE + button to search up
the dial or TUNE - to search down the dial. If the button
is kept pressed  seconds or more the search contin-
ues automatically.
On the remote control press the TUNE + button to
search up the dial or TUNE - to search down the dial.
If the button is kept pressed  seconds or more the
search continues automatically.
Display when a FM station 0.0MHz is tuned:
Display when an AM station 080kHz is tuned:
Tuner pre-sets
A total of 0 FM or AM stations can be stored in the
memory.
Tune a desired radio station (FM or AM). Open the
memory with the MEMO button on the remote control.
Select the desired preset number with the numerical
buttons on the remote control.
The preset number and the MHz indication is alter-
nated.
Press the MEMO button on the remote control.
The display indicates SAVE OKAY shortly.
Repeat the above procedure to pre-set 9 more radio
stations.
Display when FM 0.0MHz is stored to preset no. 
Display when AM 080kHz is stored to preset no. 9
8
RDs (Radio Data system)
RDS is a system that sends information (digital data)
for FM broadcasts together with the broadcast signal.
Tuners developed for RDS reception can convert
these digital data to display program names and radio
text etc.
Using RDs (Europe only)
The following RDS functions are available on this unit
(in the following order):
PS (Program Service Name)
Displays the station name
RT (Radio Text)
Displays any messages sent by the station
Press the RDS button on the remote control to switch
between RDS OFF, RDS PS and RDS RT
Data on the display
Tune in a radio station with an RDS signal.
If RDS is set to off, the display shows the station
frequency. If RDS is set to RDS PS the display shows
the station name, if it is an RDS station.
If RDS is set to RDS RT, the Radio text message will
be displayed. This feature may take some time since
the message has to be downloaded fully before it is
displayed.
Example: Display of SR P in RDS PS mode
Example: Display of message in RDS RT mode
NOTE: Some FM stations do not send RDS informa-
tion so this feature may not be available for all FM
stations.
The RDS functions may vary between different
radio stations and countries.