Audio Pro DVD ONE User Manual page 8

COnTROls AnD inDiCATORs
MAin UniT
Rear panel
18) AUX 1 Optical digital audio input
Connect an optical cable from an external audio/video
source.
19) Optical digital audio output
Connect an optical cable to an external decoder, ampli-
fier or receiver.
20) Preout
Connect to an external power amplifier, wireless trans-
mitter or to active speakers (with built-in amplifier). Gain
is controlled by the volume control
Note: This preout will not be muted when headphones
are connected.
21) subwoofer preout
Connect to a powered subwoofer.
22) sCART input/output
Output: Connect a scart cable to a TV or a video player.
Note: Do not use Scart as input source if a TV is connec-
ted using scart.
input: Connect a scart cable from and external audio/
video source. For input, select scart as source.
MAin UniT
side panel (right side)
1) s-ViDEO input (siDE)
Connect an S-VIDEO cable from an external video
source. Connect audio cables to Audio left and right
input. Select SIDE as source.
2) Video input (siDE)
Connect a video cable from an external video source.
Connect audio cables to Audio left and right input.
Select SIDE as source.
8
1 2
23) AM antenna input.
Connect the enclosed AM antenna. Place the an-
tenna where best reception is found.
24) FM antenna input
Connect the enclosed FM antenna wire. It is also
possible to connect a communal antenna or an out
door antenna.
3 4
3 & 4) Audio input (siDE)
Connect an RCA cable from an external audio
source. Select SIDE as source.
5) UsB input
Connect a USB memory. Use the remote control
to navigate the menus on the screen. Select USB
as source. (GB is maximum size)
6) headphones
Connect a headphone with a ,5 mm stereo plug.
The main speaker output will be off when the
headphone is plugged. Note: Preout will not be
set to off.
5 6