Audio Pro DVD ONE User Manual page 16

OsD (On sCREEn DisPlAY)
PARENTAL SETUP:
Move the jog down to enter the desired file.
Lock system:
(Default password is 1234)
- Enter Password to lock the parental system
(the selected MPAA rating)
Unlock system:
- Enter password to unlock the parental system
MPAA rating: (
Select MPAA rating)
- : Approved for all ages
- : Most youth
-  PG: Parental guidance suggested
-  PG : Parental caution for cildren under 
- 5: Most teens
- 6 PG-R: People under 7 with parents only
- 7 NC-7: Nobody under 7 admitted
- 8 Adult movies
- No parental
Set password:
- Old password
- New password
- Confirm new password
Exit:
Push OK to exit this setup menu.
Push the jog to the left.
Note: Push Setup if you immediately want to leave
the OSD menu.
AUDIO SETUP:
Move the jog down to enter the desired file.
Bass:
Adjust the preferred bass level on the scale to the
right. Press OK to confirm the new setting.
Push the jog to the left.
Treble:
Adjust the preferred treble level on the scale to
the right. Press OK to confirm the new setting.
Push the jog to the left.
6
(----)
(----)
(----)
Sub ON/OFF:
- Select subwoofer ON or OFF.
Press OK to confirm the new setting.
Push the jog to the left.
Sub gain:
- Adjust the preferred sub gain on the scale to the
right. Press OK to confirm the new setting.
Push the jog to the left.
Sub filter:
- Adjust the preferred crossover setting on the scale
to the right. Press OK to confirm the new setting.
Push the jog to the left.
AUDIO INPUT SETUP:
Move the jog down to enter the desired file.
AUX  Video:
- Select the Audio input to be combined with the AUX
 Video input. Analog audio (RCA), Coaxial digital or
Optical digital. Press OK to confirm the new setting.
Push the jog to the left.
Speaker:
- Select size of the connected speakers. Large
or small. Large will be a full range output and small
have a frequency cut at 0 Hz. Select and confirm
OK.
Push the jog to the left.
Audio sync.:
- It is possible to change the timing of sound com-
pared to the picture. On some discs, the sound and
picture is not in sync. Change the timing of sound
to be in syncronized to the picture. Change can be
made either + or - depending on the disc error.
Select and confirm OK.
Push the jog to the left.
Exit:
Push OK to exit this setup menu.
Note: Push Setup if you immediately want to leave
the OSD menu.