Table of Contents
Advertisement
8 Capturing intraoral images
8.2 Capturing images into study template
About this task
Steps
12
Planmeca ProSensor® HD
The sensor orientation is indicated in the image by a grey dash.
The triangle corresponds to the upper right corner of the sensor when
positioned as illustrated with the cable running on the backside of the
sensor.
5. Take the next exposure, or click Done to return to the Imaging module
when all exposures have been captured.
NOTE
Remove the sensor from patient's mouth when all exposures have been
taken.
The images are captured into study templates containing a predefined set of
multiple images.
1. Click the intraoral exposure with study button on the main page of the 2D
module or on the top toolbar.
User's manual
Advertisement
Table of Contents
