Safety Precautions - Planmeca ProSensor HD User Manual

5 Safety precautions

5 Safety precautions
4 Planmeca ProSensor® HD
NOTE
The system should be operated by qualified personnel only.
NOTE
EMC requirements have to be considered, and the equipment must be
installed and put into service according to the specific EMC information
provided in the accompanying documents.
CAUTION
Handle the Planmeca ProSensor according to the instructions given in this
manual. Do not pinch the sensor or the cable. Do not to drop the sensor or
pull strongly the sensor cable. Never cut, nick or sharply bend the sensor
cable. Always advise the patient not to bite the sensor or the cable. The
Planmeca limited warranty does not cover damage which is due to misuse,
e.g. dropping the sensor, neglect, or any cause other than ordinary
application.
CAUTION
Do not let the sensor cable run along the floor. Protect the cable from rolling
over it with a chair or walking over it.
CAUTION
Do not store or use the Planmeca ProSensor near (3m or 10 ft) an
electrosurgical knife.
CAUTION
Do not unnecessarily touch the connector pins to keep them clean.
WARNING
No modification of this dental unit is allowed.
User's manual