Table of Contents
Advertisement
8 Capturing intraoral images
8.1 Capturing single intraoral images
Steps
User's manual
When connecting the sensor for the first time the message
calibration files appears on the Planmeca Romexis window. Also, if you
connect the same sensor to another workstation the files are loaded again.
1. Click the intraoral exposure button on the main page of the 2D module or
on the top toolbar to initiate the intraoral image capture mode
Intraoral Exposure window appears.
The
When the X-ray unit is in ready state a message
appears on top of the window.
2. Prepare the patient for exposure, select exposure parameters and
position Planmeca ProX as required, for more information refer to
Planmeca ProX user's manual.
When the Planmeca ProSensor system is ready for exposure the
Waiting for Exposure appears on top of the window.
message
3. Take an exposure as usual.
After the exposure the message Saving the image appears on the
display and the image is automatically stored into the database.
4. Define the tooth numbers and sensor orientation.
8 Capturing intraoral images
Loading
Waiting for Ready
Planmeca ProSensor® HD
11
Advertisement
Table of Contents
