Zte MC8010CA User Manual page 33

clients connected to the guest SSID.
NOTE:
Scan the QR codes to connect to the guest Wi-Fi.
Managing WPS Settings
Select the SSID and the authentication method for Wi-Fi Protected Setup
(WPS). Click Apply to start the WPS process for the Smart Hub. See
the Wi-Fi Protected Setup (WPS)
Managing Advanced Wi-Fi Settings
Set the following options for Wi-Fi.
•
Country/Region code: Select the country in which your device is
located.
•
Max connections: Set the maximum number of clients that can connect
to the Smart Hub (regardless of bands and SSIDs) simultaneously.
•
Network mode: Select the WLAN protocol. The recommended mode
depends on the Wi-Fi band. When using the 2.4 GHz band, select
802.11 b/g/n. When using the 5 GHz band, select 802.11 a/n/ac.
•
Channel Bandwidth: Select a bandwidth option if necessary (not
recommended without prior experience).
•
Channel: Select the channel (frequency) for your Wi-Fi networks. The
recommended option is Auto, which will select the channel with the least
potential interference.
•
Wi-Fi coverage: Set the coverage of the Wi-Fi network. Larger range
will consume more power.
Managing Internet Wi-Fi
You can use this function to extend your existing Wi-Fi network. See
Connecting to Existing Wi-Fi Networks
for details.
for details.
Using
27