Table of Contents
Advertisement
NOTE:
Disable Guest SSID before you enable Internet Wi-Fi.
Advanced Settings
Click Advanced settings on the 5G CPE home page to configure the
following options for your Smart Hub. Click Apply to save your settings.
•
Night mode: You can turn on or off indicator lights or set Wi-Fi sleep
schedule.
NOTE:
Turning off indicator lights will not affect network connections. When the
Smart Hub enters sleep mode, Wi-Fi will be turned off.
•
Router: Set IP address, subnet mask, DHCP server parameters, MTU,
MSS, and MAC-IP binding.
•
Firewall: Set port filtering, port forwarding, URL filtering, UPnP, DMZ,
and system security settings.
•
Update: Check for system update or set auto-check (including auto-
check while roaming) options.
•
Others: Reset or restart the Smart Hub, set Simple Network Time
Protocol (SNTP) for time synchronization and Daylight Saving Time,
check network status, use diagnosis and network tools, set periodic
restart options, and set L2TP and PPTP VPN parameters.
28
Hide quick links:
Advertisement
Table of Contents
