Siemens SENTRON PAC3200T Product Manual page 49

"Security" parameter
With the following parameters, write access to the device settings of the PAC3200T is
blocked.
The protection intervenes in case of the following actions:
● Load to device
● Reset maximum
● Reset minimum
● Reset counter
● Reset device
● Reset device to factory defaults
● Reset password
● Update firmware on device
Note
The data can be read without any restrictions.
Activate security with powerconfig:
1. In menu item "Views", select the sub-menu "Security".
The "Security" window is displayed.
2. In the menu item "Options" select "Activate online view".
The "Security" window is refreshed.
The following degrees of protection can be activated/deactivated:
● Password protection
● Hardware write protection
● Device access control
● TCP/IP settings
PAC3200T
Equipment Manual, 02/2020, L1V30415168B-02
Commissioning
6.3 Parameterizing the device
47