Maintenance; Disposal; Products; Packaging Materials - Bosch Rexroth NYCe 4000 Instructions Manual

14/19

Disposal

Rexroth products are part of this integral concept. Bosch Rexroth product
characteristics have to be taken into consideration in an integral IT security
concept. The relevant characteristics are documented in the IT security guideline
(R911342562).

15 Maintenance

The SERCOS III Master module has no special maintenance requirements.
16 Disposal

16.1 Products

Our products can be returned to us free of charge for disposal. It is a
precondition, however, that the products are free of oil, grease or other dirt. In
addition, when returned the products must not contain any undue foreign
matter or foreign component.
Please send the products "free domicile" to the following address:
Bosch Rexroth AG
Bgm-Dr.-Nebel-Str. 2
97816 Lohr a.Main, Germany

16.2 Packaging materials

The packaging materials consist of cardboard, wood and polystyrene. They can
be easily recycled. For ecological reasons you should not return the empty
packages to us.

16.3 Environmental protection

No release of hazardous substances.
●
Our products do not contain any hazardous substances that they can release
in the case of appropriate use. Normally there are not any negative effects on
the environment to be expected.
Materials contained in the products.
●
Electronic devices.
Electronic devices mainly contain
– steel
– aluminum
– copper
– synthetic materials
– electronic components and modules
Recycling.
●
Bosch Rexroth AG R911337377_Edition 05
NYCe 4000 Multi-axis motion control
system