Table of Contents
Advertisement
Configuring Your Network Adapter for GigE Visionscape
Then go to:
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Visionscape\
GigEVision\Camera_0
Note: In newer builds of Visionscape there are more entries in these
directories.
Depending on how many cameras you have connected you may have
Camera_0, Camera_1, Camera_2 and Camera_3 directories – these all
have the same things inside. You'll need to repeat the procedure for
Camera_0 on all 4 cameras.
The two parameters InterPacketDelay and PacketSize are both set to 0,
which tells Visionscape to use its default values. The first thing you need
A
to do is set the PacketSize to 8192. Right-click on PacketSize (the actual
word) and select Modify. You'll see the following:
Getting Started with Visionscape GigE Cameras
A-11
Advertisement
Table of Contents
Need help?
Do you have a question about the Visionscape GigE and is the answer not in the manual?