Installation Procedure - Toto tb960s Installation And Owner's Manual

InstallatIOn PROCEduRE

1. Spout Installation
Make sure water supply is turned off.
After applying the final finish, remove the plug
from the spout shank.
Loosen set screw on the back of the spout.
Remove the spout connector.
Thread the spout connector onto the rough
deck adapter.
Carefully insert the spout onto the spout
connector. Take care not to damage the O-ring.
Secure the spout with set screw
Spout
Spout connector
Rough deck adapter
4
Set screw
Finish Deck