Included Parts; Installation Procedure - Toto Connelly TS221DW Installation And Owner's Manual

Check to make sure that all these parts were included in your packaging:
Handle Assembly*
Screw and
Lock Washer
* Actual product may vary in appearance depending on the model.
1. Confirm that the valve has been
installed properly.
N OTE: The finished wall surface should
be between the min and max markings
on the plaster guard. See the appropriate
installation manuals for further
information (TSMVW or TSMV).
2. Remove the screw securing the
plaster guard to the valve body,
then pull the plaster guard outwards
to remove it.

INCLUDED PARTS

Escutcheon*
Threaded
Extension

INSTALLATION PROCEDURE

Adapter
2-1/2" [65mm] MIN.
2-1/2" [65mm] MIN.
3-3/4" [95mm] MAX.
3-3/4" [95mm] MAX.
Screw
Screw
3
Collar
Set Screw and
Hex Wrench
Finished
FINISHED WALL
Wall
SURFACE
Surface
Min./Max.
MIN./MAX.
MARKINGS
Markings
Plaster Guard Plaster Guard