Software\Firmware; Printer Hardware - Magtek EXPRESSCARD 1000 Maintenance Manual
Hide thumbs
Also See for EXPRESSCARD 1000:
- Hardware service manual (194 pages) ,
- User's installation and operation manual (37 pages) ,
- Programming reference manual (33 pages)
Advertisement
Software\Firmware:
To check the current software and firmware versions on the ExpressCard 1000 press the [Help] button
at the bottom of any screen.
After the Help screen is displayed, press the [Version Information] button to display the current software
and firmware installed on the unit, as shown in the figure below.
Note: The serial number of the unit is always shown in the upper left corner of the help screen.
Printer Hardware:
Cleaning Sensors
Use the included can of compressed air to clean the sensors indicated in figures 6 thru 8 below.
Rev. 1.01
4
P/N: 99875478
Advertisement
Need help?
Do you have a question about the EXPRESSCARD 1000 and is the answer not in the manual?