Subscribe to Our Youtube Channel
Related Manuals for Vitea Care PROMYK
Summary of Contents for Vitea Care PROMYK
- Page 1 USER’S MANUAL PROMYK Children’s rehabilitative stroller DRVG0L Edition AM 05.2019...
-
Page 2: Table Of Contents
Table of Contents Introduction ............................. 3 Product description .......................... 3 Application ............................5 Contraindications ..........................5 Application ............................5 Safety of use ............................ 8 Everyday use and maintenance ..................... 10 Technical parameters ........................15 Symbols ............................15 Contact details ........................... 17 PLEASE READ CAREFULLY BEFORE USING WHOLE OF INSTRUCTIONS... -
Page 3: Introduction
1. Introduction Thank you for choosing our product. We are deeply convinced that it will meet your expectations. Please read this document before first use. This manual is passed in order to provide the necessary information for the safe use of the device. The correct application of the recommendations will contribute significantly to extend the durability and aesthetics of the product. - Page 4 Elements that should be inside the packaging: Illustration 2. Stroller Clips Illustration 3. Front guard Handle Illustration 4. Canopy Illustration 5. Head stabilizer...
-
Page 5: Application
Illustration 6. Sleeping bag Illustration 7. Abduction wedge 3. Application The stroller is designed for children with disabilities and / or dysfunctions movement activities as a result of damage of the CNS Central Nervous System. It can be used in children with CP Cerebral Palsy, myelomeningocele, muscle disorders, dysfunctions of the lower limbs. - Page 6 levers (by turning them so that they are horizontal). • To prevent unplanned stroller movement, block the rotation of both rear wheels (activate the foot brake – Illustration 16.). • When the frame and backrest are set at the desired angle, lock the levers - turn them to a vertical position - one lever pointing down, the other up.
- Page 7 • Make sure that the barrier is properly fastened. Here attach canopy handles Illustration 13. • Then mount the headrest. To do this, unfasten the head stabilizer Velcro, choose the appropriate setting, and then pull it to the back of the Velcro through the holes in the upper part of the backrest upholstery, then fasten it.
-
Page 8: Safety Of Use
• After unlocking the lever on both sides of the stroller, fold the frame (pointing it downwards), and then lightly press (Illustration 8., 9.). • The footrest must be folded. To do this, loosen the wing knob and from the horizontal position move the locking part to the vertical position. - Page 9 h) While adjusting the parameters of the stroller, the child should not be in a stroller. i) All repairs must be carried out by qualified personnel and during warranty period only by the manufacturer's service. j) The stroller is not suitable for running or iceskating. k) The stroller is designed for transporting only one child.
-
Page 10: Everyday Use And Maintenance
Furthermore, with low temperatures there is a danger of overcooling metal parts of stroller. It may cause burns or frostbite parts of the body. ff) Keep caution while moving on sloping surfaces. The maximum allowable slope angle up and down is 5%. gg) With the stroller you can only use on surfaces where all four wheels touching the ground. - Page 11 Brake lever Illustration 20. Illustration 19. • To do this, move the brake lever to the left (Illustration 20.). • To unblock the brake, reverse the movement to apply the brake. LENGTH OF FOOTREST ADJUSTMENT • To change the length of the footrest, remove two footrest locks on both sides of the footrest (Illustration 21.).
- Page 12 BELTS SYSTEM Shoulder belts Seatbelt three-point Belts adjustment buckle elements seat belt three-point Illustration 23. Illustration 24. • whose length can be adjusted The stroller is equipped with a stabilizing belts (Illustration 20.). • Settings of all stabilizing elements should be discussed with your doctor or physiotherapist. •...
- Page 13 ENTRANCE TO THE THRESHOLD OR CURBS • To enter stroller to the threshold or curb, it must be set so that the front wheels were set on straight ahead threshold or curb and near to it. • Then place a foot on the lock back of stroller, press lightly and push the handle down. •...
- Page 14 • Screw the plastic top on the valve. EVERYDAY USE AND MAINTANCE • Clean the plastic parts and the frame with damp cloth without the addition of detergents or other similar ones. • Systematically remove the dirt from the movable elements of the stroller (screws, resistance mechanisms).
-
Page 15: Technical Parameters
8. Technical parameters Permitted user weight 75 kg Stroller height 1260 mm Backrest width 380 mm Stroller width 600 mm Stroller length 1420 mm Front seat height 550 mm Seat depth 460 mm Seat width 390 mm Backrest length 75 mm Stroller weight 25 kg + / - 5% Front wheels diameter... - Page 16 Read the user's manual Warning Catalog number Serial number Protect from humidity Protect from sunlight Permitted user weight Maximum safe slope Use inside and outside buildings The product is intended to transport by car...
-
Page 17: Contact Details
The product is not designed for use as a seat to transport in a motor vehicle The product is intended to the transport by plane The possibility of fingers jamming Allowable temperature limit Do not stand on the footrest 10. Contact details mdh sp.
Need help?
Do you have a question about the PROMYK and is the answer not in the manual?
Questions and answers