Messages - Toyota AUDIO 1-DIN Owner's Manual

MESSAGES

The following messages appear (blink) in the DISPLAY WINDOW
according to the status of the main device.
Message
CD MP3/WMA
This message appears when the disc is stained or damaged.
Check if the inserted disc is stained or upside-down.
E : 1
When the disc is dirty, clean the disc. The upside-down
disc must be taken out and inserted correctly. Do not use a
scratched or bent disc.
This message appears when the player cannot be operated
E : 2 because of some problems.
The disc must be ejected from the player.
This message appears when there is no playable music data
recorded on the CD-R/RW disc or it is recorded in a format that
E : 6
is not playable.
Insert a CD-R/RW disc that contains playable music data.
An unsupported USB Memory is connected.
E : 1
Connect a supported USB Memory.
This message appears when operation of some problem is not
E : 2 possible due to the player.
Remove the connected USB Memory.
This message appears when the USB Memory cannot operate
due to an over supply of electric current.
E : 3
Temporarily disconnect the USB Memory.
This message appears when failed playback or difficulty in
transmission is detected.
E : 4
Reconnect the USB Memory.
This message appears when there is no file recorded or no
E : 5 playable music le on the USB Memory.
Connect a USB Memory that contains playable music data.
Symptom / Description
USB
Message
This message appears when there is a music le that is not in
E : 7 a playable format recorded on the USB Memory.
Connect a USB Memory that contains playable music data.
* If a disc could not be ejected, please contact nearest dealer for service.
- 16 -
Symptom / Description