Aux Operation; How To Use The Aux; How To Adjust The Aux Volume - Toyota AUDIO 1-DIN Owner's Manual

Table of Contents

Advertisement

AUX OPERATION

HOW TO USE THE AUX

By connecting the 3.5 mm headphone jack of your own portable audio
device to AUX TERMINAL
, you can listen to your own music through
this unit.
(1) Connect the portable audio device to the AUX TERMINAL
mini plug cable.
(2) Press the MODE BUTTON
Connecting the mini plug cable to the AUX TERMINAL
mode and allows you to use a portable audio device.
When the mini plug cable is disconnected from the main unit, AUX mode is
disabled.

HOW TO ADJUST THE AUX VOLUME

(1) Press the VOLUME CONTROL BUTTON
Press the VOLUME CONTROL ( ) BUTTON
Press the VOLUME CONTROL ( ) BUTTON
To adjust the volume by one step at a time, press the VOLUME CONTROL
( ) or ( ) BUTTON
for less than 1 second.
To adjust the volume steadily, press and hold down the VOLUME
CONTROL ( ) or ( ) BUTTON
with the
to select "AUX".
enables AUX
to adjust the volume.
to increase the volume.
to decrease the volume.
for more than 1 second.
Either place the portable audio device and mini plug cable somewhere where
they do not interfere with driving or temporarily secure them at a location where
they are not in the way. They could impede driving and cause a traf c accident.
ATTENTION
Take care the terminals of the mini plug do not catch your hands.
Do not connect, operate or remove the portable audio device while driving.
The volume set by adjustment in the AUX mode is effective in the AUX mode
only.
To power the portable audio device, use the battery or other power source
supplied with the device.
The AUX device cannot be controlled from the main unit.
Reduce the AUX volume to prevent speaker damage.
You can adjust within a range of 63 (maximum) and 19 (default) and 0.
- 15 -
CAUTION
NOTE

Advertisement

Table of Contents
loading

Table of Contents