(Close-To-Ceiling); Installing The Ceiling Cover - Emerson PRO Series Owner's Manual

10.1
Remove the Left Screw and Lockwasher from each
side of the Hanger Bracket (Figure 20) and loosen the
other Two Screws.
NOTE: When installing the ceiling fan using the
close-to-the-ceiling method, carefully lift the fan
assembly from the hook on the hanger bracket and
proceed as follows.
10.2
Lift the Ceiling Cover up to the Hanger Bracket. Engage
the Slots in the Ceiling Cover with the Loosened
Screws in the Bracket and turn the Cover Counter-
Clockwise (Figure 21).
Be sure that the Lockwashers are between the Screw
Heads and the Ceiling Cover.
Install the other Two Screws and Lockwashers; tighten
all Screws securely.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.

10. Installing the Ceiling Cover

HANGER BALL/DOWNROD ASSEMBLY SHOWN
Figure 20
HANGER BALL/DOWNROD
CLOSE-TO-THE-CEILING
Figure 21
15
REMOVE LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
LOOSEN THE RIGHT
SCREW/LOCKWASHER
ON EACH SIDE
REINSTALL LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
CEILING COVER
HANGER BRACKET
REINSTALL LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
HANGER
BRACKET
CEILING COVER
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT