Table of Contents
Advertisement
Accessories
Electrical after-heating element - integral
You will need to order an after-heating element if, for instance, you want to use the ventilation unit for heat-
ing the building.
The electrical after-heating element is installed in the ventilation unit at the factory.
Water after-heating element - integral
You will need to order an after-heating element if, for instance, you want to use the ventilation unit for heat-
ing the building.
The water after-heating element is installed in the unit at the factory and it comes with a 3-way valve and
a Danfoss Actuator.
Shut-off damper
Shut-off damper for external mounting comes in a pack of 2 together with 230V damper motors.
If the unit is to be installed outdoors, the damper motors should be fitted with a cover with protection rating
IP55
(not supplied by Nilan).
CO
-sensor
2
If you want the ventilation level to regulate in accordance with how many people are in the building, you can
order a unit with an integral CO
On the control panel you set the CO
set fan speed level.
Humidity sensor
If you want to regulate the fan speed level in accordance with the humidity level in the extract air, you can or-
der a unit
with an integral humidity sensor.
The unit can change the fan speed level to low or high humidity level.
-sensor.
2
-level you want. If this level is exceeded, ventilation will increase to the
2
14
Advertisement
Table of Contents
