Automatic Stop System - Paramina MISTRAL CLASSIC M6-ET User Manual

User Manual - Mistral M6&M8 -
1
The user can adjust the interval time (2) from 0,15 -
15 sec (proposed time 1,5sec), and the discharge
time (1) from 0,15 - 15 min (proposed time 15
min),
nd
Note for 2 Stage drain only: The numerous at
internal time (2) are at a percentage of 15sec. So at
internal time (2) 1,5 sec = 10(%). Respectively the
numerous at discharge time (1) are at a percentage
of 15min, so 15min = 100(%)
Dual pressure filling module
 Optional equipment.
It gives the possibility to the user to fill 200 and 300 bar cylinders alternatively. In this application, 2 filling hoses are
used, one for the 200 bar filling and one for the 300 bar filling. By turning the lever valve in vertical position (1), we
fill at 225 bar max. pressure and by turning the lever valve in horizontal position (2), we fill at 330 bar max.
pressure.

Automatic stop system

 Optional equipment.
When the pressure reaches the pre-adjusted final level the compressor stops automatically through the pressure
switch (1). The restart of the compressor must be done manually.
Max. operating pressure 330 bar.
PARAMINA SA – Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860
Fax: 0030 210 5575868, email:
04-2018 from s.n.1882761 edition
2nd Stage
2
1
service@paramina.gr
3rd Stage
1
The user can adjust the interval time (2) from 0,5 -
45 min (proposed time 20min), and the discharge
time (1) from 0,5 - 10 sec
sec).
1
- website: www.paramina-compressors.com
2
(proposed time 2-3
2
.
14