Safety Regulations - Paramina MISTRAL CLASSIC M6-ET User Manual

User Manual - Mistral M6&M8 -
 Do not heat the cylinders or any of their parts, because pressure will rise.
 For loading – lifting of the unit or heavy parts of it, lift from the handle on the one side and form the base of the
compressor on the other side or use the proper lift truck that is handled by trained stuff. Never lift from the
base of the motor or the motor itself.
 Make sure you have properly secured the unit during its elevation or transport.
 The unit must be unplugged from mains supply even during small movements. After you move it, plug it again
according to regulations and turn it on, following the directions described in this manual.
 The compressor is not made for use by the sea. In such a case, spray the unit with anticorrosive material. It (if
used on a boat/ship) must be stored under the deck after use.

Safety Regulations

The PARAMINA Mistral compressor is a high pressure air-compressor and it is made according to EU directive
2006/42/EC for the safety of machinery. Noise complies with 2005/88/EC directive.
The manufacturer follows all regulations above and declares that the unit is manufactured accordingly.
Following the safety regulations, an authorized professional in site must supervise compressors that will be used as
filling stations before starting their operation.
PARAMINA SA – Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860
Fax: 0030 210 5575868, email:
04-2018 from s.n.1882761 edition
service@paramina.gr - website: www.paramina-compressors.com
.
7