Table of Contents
Advertisement
Table of Contents
Description .................................................................... 2
Purpose ......................................................................... 2
Important Safety Information ..................................... 3-4
Identification .................................................................. 5
Specifications ................................................................ 5
Operation .................................................................... 6-7
Periodic Pressure Relief Valve Check............................ 7
Illustrations ................................................................. 8-9
Parts List ..................................................................... 10
Description
The RK06AT Hydraulic Crimping Tool is a dieless
crimping tool intended to crimp aluminum and copper
connectors onto electrical cable.
This crimping tool is to be coupled to any Greenlee or
Greenlee hydraulic pump capable of developing 700
bar (10,000 psi). Suggested pumps include:
Pump Type
Hand Pump ............................................................755
Electric Pump (120-Volt Models) ............................975
Electric Pump (220-Volt Models) ..................976-22FS
Greenlee Intensifier ............................. H6710B*
* Requires PVA0021 Control Valve
Greenlee Tools, Inc.
Model Number
980
960 SAPS
Greenlee PPS 1020
976-22PS
980-22FS
980-22PS
H6710B1*
H6710B4*
KEEP THIS MANUAL
2
RK06AT Hydraulic Crimping Tool
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
RK06AT Hydraulic Crimping Tool
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Blackburn is a registered trademark of Thomas & Betts.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
