Page 1
Level gauge Series LS Instructions Manual R-MI-LS Rev.: 0 English version...
Page 2
PREFACE Thank you for choosing the level gauge series LS from Tecfluid. This instruction manual allows the installation and operation of the level gauge series LS. It is recommended to read it before using the equipment. WARNINGS This document shall not be copied or disclosed in whole or in any part by any means, without the written permission of Tecfluid.
DIMENSIONS ..................INTRODUCTION The LS series level gauge is mounted on the top of the tank by means of a suitable flange or coupling thread. It consists of a float connected to a guide rod with a magnetic system on its end.
RECEPTION The level gauges are supplied conveniently packaged for transportation together with their instruction manual for installation and operation. All devices have been verified in our facilities. Check that there are no knocks on the float. Pull with care the float from the coupling flange or thread and check that the shaft guide of the float is not bent and does not have any dent that avoids the smooth movement along its entire length.
The mounting position of the gauge is vertical on top of the tank. The float level varies according to the level of the liquid. Introduce with care the float through the mounting hole until the flange or coupling thread couples with the tank. If the diameter of the float is larger than the tank hole, the float should be removed by unscrewing it, and reassembled from inside the tank.
DIMENSIONS Models LS … LSL20 Models LS … LSL21 Models LS … LSL20 guided...
Page 8
WARRANTY Tecfluid guarantee all the products for a period of 24 months from their sale, against all faulty materials, manufacturing or performance. This warranty does not cover failures which might be imputed to misuse, use in an application different to that specified in the order, the result of service or modification carried out by personnel not authorized by Tecfluid, wrong handling or accident.